Have questions?

  • Guaranteed Fitment

    Designed and tested in-house

  • In-House Experts

    We know our products

  • Pre-Cut Products

    DIY friendly installation

  • Wordwide Delivery

    Free USA Shipping over $49

Rear Bumper Reflector Overlay - Smoke Tint | 2008-2017 Mitsubishi Lancer EVO X

$9.99
SKU: R-143-SMK
Shipping: Calculated at Checkout
Adding to cart… The item has been added

2008 -2013 Lancer / Evo X Rear Bumper Reflector Smoke Out Overlays 

Making the rear end of your vehicle is easier than you think. Simple pre-cut overlays we've developed make it simple for you to install smoke tint reflectors at home, instantly making the rear end more aggressive. Computer cut for precise fitment & easy to install! This is an easy peal and stick tint accent overlay. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.  Check your local laws and regulations prior to purchasing. Disclaimer information attached below.

INSTALL GUIDE 

TOOLS REQUIRED: PRO FELT SQUEEGEE, HEAT GUN or Warm Sunny Day to Post Heat the product

WET INSTALL BASICS: Getting the vinyl installed on your ride is very easy and only requires minimal tools. First you need: lubrication spray solution.  You can make a lubrication spray solution at home by using a spray bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HEREYou'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F).  

SPECIFICATIONS & FEATURES

♦ Sold as a set
♦ Long 1-3 year outdoor durability 
♦ Adds a unique style
♦ Adhesive backed for easy installation and removal
♦ Maintenance Free & Car wash safe
♦ Super easy installation 

NOTE: Using a felt edge squeegee is highly recommended for this application. Available for purchase in our application tool section above. 

Lancer-bump-smk-overlays

Customers Also Viewed