Select your vehicle

4 x4 OFFROAD DECAL SET of 2 - 16.5 x 3.5 inches ( Choose Your Color )

SKU:
4x4decal16.5x3.5
Shipping:
Calculated at Checkout
  • 4 x4 OFFROAD DECAL SET of 2 - 16.5 x 3.5 inches ( Choose Your Color )
$13.99

Description

Notice: This is a custom product that takes time to produce. If this product is in addition to your order you can expect a 3-5 day production delay. We do try to get these overlays out as soon as possible but please be patient with us.

SUPERIOR QUALITY MATERIALS.

Premium only uses the highest quality cast vinyl on the market designed to last 1-3 years of harsh outdoor weather. It's far more durable than our competitors' cheap, calendared vinyl film.

APPLICATION.

Simple Peel and Stick

DRY INSTALL: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. What you'll need: A squeegee and sometimes a blade and or heat gun will be needed. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). Let's begin, You’ll first want to start by positioning the vinyl into place on your vehicle. Using a squeegee, start from the center and begin pushing the air from beneath the overlay toward the edges - sometimes a heat gun will be needed to help conform the material to aggressive bends and or corners. TRIMMING, some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required. Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let the adhesive set, if you would like you can use a heat gun to speed up the cure process. INFO  >>> DISCLAIMER INFORMATION

DIFFICULTY RATING 1/5

difficulty-rating-1-out-of-5-squeegees-premium-auto-styling.jpg

MORE >> Difficulty Rating Information

 

View AllClose