2019-2020 Hyundai Elantra GT / N-Line Hatchback | Headlight Eyelid Accent Overlay Blackout - Gloss Black, Satin Black, Textured Carbon Fiber, or Shadow Black
The perfect overlay that doubles as an aggressive stylistic approach, while also protecting the top of your headlight from common sun fade problems. Easy installation, peel and stick process, outlined in our product description makes this product very DIY friendly! The overlays are precision cut from a durable vinyl for a perfect fit and aggressive styling that’s sure to look good on your vehicle! Made from quality automotive vinyl.
NOTE: This product has only be tested on the GT (N-LINE) Hatchback. We do not have confirmation if the headlights on the the R-Spec, the N, or the i30 are the same. Thus, we cannot confirm fitment for them at this time until this product has been tested on those vehicles. Interested in different vinyl wrap color options, email us at Sales@premiumautostyling.com with the existing Vinyl Color you are looking into.
INSTALL GUIDE
TOOLS REQUIRED: PRO FELT SQUEEGEE
DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.
FULL INSTALL: After the surface is clean and you have read and completed "DRY INSTALL BASICS" Start by peeling the vinyl from the backing paper while making sure not to stretch the vinyl or warp the edges. Start with the top corner of the headlight, the corner that faces towards the rear of the vehicle. Gradually lay the vinyl down following the top edge nearest to the hood until you reach the end of the overlay and tuck the corner to the inner side of the headlight so it is not visible. If you need to reposition your first corner, carefully lift the vinyl back up. During the alignment process you shouldn't be pushing the vinyl into place or squeegeeing it down just yet. Once the entire overlay is aligned you can use the squeegee to remove any and all air and moisture from underneath the vinyl.
Once complete, post heat the entire product or leave your vehicle outside in the warm sun for at least 30 minutes. Check to make sure you do not have any left over air pockets and your install is complete.
SUPERIOR QUALITY
• Includes driver and passenger side overlays ( total pieces included is 2).
• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.
• Car wash safe.
• Can be removed without any damage to surface.
• 1-3 year life expectancy.
• Check your local laws and regulations
>> DISCLAIMER INFORMATION
DIFFICULTY RATING 2/5 
Excited about your finished Product, let us know below! Take a picture while your at it, and let us know on instagram! @premiumautostyling /// Interested in a custom color or finish for this product. Contact our team at orders@premiumautostyling.com and we can look into your request before you place your order.
