Select your vehicle

Hood Scoop Inlay - Gloss Black | 2008-2015 Mitsubishi Evo X

SKU:
ACC163-GB
Shipping:
Calculated at Checkout
  • Hood Scoop Inlay - Gloss Black | 2008-2015 Mitsubishi Evo X
  • Hood Scoop Inlay - Gloss Black | 2008-2015 Mitsubishi Evo X
  • Hood Scoop Inlay - Gloss Black | 2008-2015 Mitsubishi Evo X
  • Hood Scoop Inlay - Gloss Black | 2008-2015 Mitsubishi Evo X
  • Hood Scoop Inlay - Gloss Black | 2008-2015 Mitsubishi Evo X
  • Hood Scoop Inlay - Gloss Black | 2008-2015 Mitsubishi Evo X
$19.99

Description

 2008-2015 Mitsubishi Evo X 

Premium Auto Styling brings you yet another inexpensive way to customize your vehicle , thanks to our hood scoop inlay. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE 

DRY INSTALL: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. What you'll need: A squeegee is all that is needed for this instal. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). 

Start by aligning the top left and right edges. You can lift this material multiple times before it sticks all the way to make sure you have it positioned just right. Once aligned, everything else will fall into place. Pay close attention to keeping the overlay level so it does not throw off the alignment on either side as you lay it into place. Once the placement is confirmed, you can squeegee the vinyl down. Start from the center of the overlay, and push all the air from under the vinyl out towards the edges.

 

SUPERIOR QUALITY 

• Adhesive backed film for easy installation and removal.  
• Maintenance free & car wash safe. 
• Can be removed without any damage to surface. 
• 1-3 year life expectancy. 

>> DISCLAIMER INFORMATION 

 

DIFFICULTY RATING 2/5

difficulty-rating-2-out-of-5-squeegees-premium-auto-styling.jpg

MORE >> Difficulty Rating Information

 

View AllClose