Have questions?

  • Guaranteed Fitment

    Designed and tested in-house

  • In-House Experts

    We know our products

  • Pre-Cut Products

    DIY friendly installation

  • Wordwide Delivery

    Free USA Shipping over $49

Reverse Light Smoke Tint Overlay | 2022-2023 Subaru BRZ

$12.99
SKU: R-132-SMK-BRZ
Shipping: Calculated at Checkout
Adding to cart… The item has been added

Stylize your 2022-2024 BRZ  with our Rear Bumper Reverse/Reflector Smoke Tint Overlay. This overlay darkens the look of the reverse light / red reflectors on the rear bumper of your BRZ to make it blend in more with the surrounding black plastics. Light output of your reverse lights are minimally effected. If you want to keep the same light output or even amplify it through our tint overlay, grab a set of our LED bulbs for your reverse lights! ----> Click here for those bulbs  <----

Premium Auto Styling Overlays are precision cut by our computers using Premium Automotive Grade Films. Unlike other companies, Premium Auto Styling Overlays are designed and produced in the USA in our own facility. We design & fit all of our products to ensure you the best fitment & results. Don't pass up this item to stylize and protect your vehicle!

INSTALLATION GUIDE 

WET INSTALLATION: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools.

 Tools Needed:

  1.  Pro Felt or Hard Squeegee (you can use a room key card or credit card in a pinch)
  2. Premium Surface Lube (you can make your own by filling a spray bottle with 16 oz of water and 1 drop of dish soap)
  3. Blade (only necessary for overlays that have extra material that needs to be trimmed)
  4. Heat Gun (not necessary for difficulty levels 1 or 2, but recommended for all installations)

 For Best results we recommend cleaning the surface that you'll be applying our overlays. Cleaning consists of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE).

Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 80 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F).

To begin, you first want to spray the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle. Use a squeegee and start from the center and begin pushing the air from beneath the overlay toward the edges - you may need a heat gun to help conform the material to aggressive bends and or corners.

TRIMMING, some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required.

Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let everything dry, if you would like you can use a heat gun to speed up the drying process. 

  

DRY INSTALLATION: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. (ONLY FOR LUXE TINT FILMS)

 

Tools Needed: 

  1. Pro Felt or Hard Squeegee (you can use a room key card or credit card in a pinch)

  2. Blade (only necessary for overlays that have extra material that needs to be trimmed)

  3. Heat Gun (not necessary for difficulty levels 1 or 2, but recommended for all installations)

 

For the Best results we recommend cleaning the surface that you'll be applying our overlays. Cleaning consists of removal of any waxes, dirt and or debris. For the cleaning process we recommend using a clay bar. CLEANING PREP SPRAY & CLAY BAR's SOLD HERE).

Before you begin installation of any vinyl overlays please make sure you are working in the right conditions. You should never install our products in direct sunlight. Also never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature range for installing vinyl is between 65 and 80 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). 

To begin, you first want to start by positioning the overlay into place on your vehicle. Use a squeegee and start from the center and begin pushing the air from beneath the overlay toward the edges - sometimes you may need a heat gun will be needed to help conform the material to aggressive bends and or corners.

TRIMMING: some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required.

Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let the adhesive set, if you would like you can use a heat gun to speed up the cure process.

 

 

FEATURES & SPECIFICATIONS

•  Includes 1 overlay

•  Adhesive backed film for easy installation and removal. 

•  Maintenance free & car wash safe. 

•  Can be removed without any damage to surface. 

•  2-5 year life expectancy. 

AVAILABLE COLORS 

• Medium Smoke Tint

 

This install is a 2 out 5 in Difficulty.  

Difficulty Rating of 2 is used when you should expect installations that are easy, but have a few spots that you'll need to take extra care. (NOT TO HARD AT ALL REALLY)

 

 Interested in a custom color or finish for this product. Contact our team at orders@premiumautostyling.com and we can look into your request before you place your order.

>> DISCLAIMER INFORMATION

Customers Also Viewed