null

Select your vehicle

Smoked Rear Bumper Reflector Overlay - Smoke Tint | 2018-2019 Ford Mustang GT

SKU:
REF138-SMK
Shipping:
Calculated at Checkout
  • Smoked Rear Bumper Reflector Overlay - Smoke Tint | 2018-2019 Ford Mustang  GT
  • Smoked Rear Bumper Reflector Overlay - Smoke Tint | 2018-2019 Ford Mustang  GT
  • Smoked Rear Bumper Reflector Overlay - Smoke Tint | 2018-2019 Ford Mustang  GT
  • Smoked Rear Bumper Reflector Overlay - Smoke Tint | 2018-2019 Ford Mustang  GT
  • Smoked Rear Bumper Reflector Overlay - Smoke Tint | 2018-2019 Ford Mustang  GT
  • Smoked Rear Bumper Reflector Overlay - Smoke Tint | 2018-2019 Ford Mustang  GT
$12.99

Description

Rear Bumper Reflector Smoke Tint Overlay | 2018-2019 Ford Mustang GT

Want to make your Mustangs Rear end more aggressive, the easiest way to do it is darken up those rear bumper reflectors. Our pre-cut tint overlay specifically made for this vehicle fits without any trimming required and minimal tools. It darkens up the reflector without entirely getting rid of its reflective capabilities. These unique tint overlays have been pre-cut for easy DIY installation and are made with quality automotive grade vinyl. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.  

INSTALL GUIDE: 

TOOLS REQUIRED: ***PRO FELT SQUEEGEE, and HEAT GUN or Warm Sunny Day to Post Heat the product

WET INSTALL BASICS: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and a heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HEREYou'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). 

CONTINUED: After the surface is clean and you have read and completed "WET INSTALL BASICS" remove the tint from the backing paper, promptly misting the adhesive side of the tint with water as well as the surface it will be applied to. Line up the top edge of the overlay with the top edge of the reflector. Once you are happy with your placement, use a squeegee with firm pressure to remove any and all air and moisture from underneath the tint itself and then proceed to post heat the product. Using a heat gun be sure to heat the surface and edges of the tint to insure adhesion. No trimming should be required at all with this product, it was designed as a simple peel and stick wet install product.

FEATURES & SPECIFICATIONS

  • Smoked appearance
  • Durable vinyl tint
  • Allows reflector lights to shine through
  • Includes driver and passenger side inserts (2 piece kit)
  • Fits all 2018+ Ford Mustang
  • Adhesive backed film for easy installation and removal. 
  • Reduces appearance of existing cracks and scratches. 
  • Maintenance free & car wash safe. 
  • Can be removed without any damage to lights. 
  • 1-3 year outdoor life expectancy. 

DIFFICULTY RATING 2/5

 
View AllClose