2022-2023 TOYOTA TUNDRA - DASHBOARD LETTERING
Premium Auto Styling brings you yet another inexpensive way to customize your 2022+ Toyota Tundra TRD Pro , thanks to our DASH lettering overlays. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout our 2022+ Toyota Tundra Grille Letting vinyl overlays.
>> KIT INCLUDES : this kit includes 1 of each letter pre cut
DRY INSTALL: Getting the vinyl installed on your Tundra is very easy and only requires minimal tools. What you'll need: A squeegee and sometimes a blade and or heat gun will be needed. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). Let's begin, You’ll first want to start by positioning the vinyl into place on your vehicle. Using a squeegee, start from the center and begin pushing the air from beneath the overlay toward the edges - sometimes a heat gun will be needed to help conform the material to aggressive bends and or corners. TRIMMING, some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required. Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let the adhesive set, if you would like you can use a heat gun to speed up the cure process.
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 1-3 year life expectancy.
• Multiple colors to choose from
DIFFICULTY RATING 2/5
MORE >> Difficulty Rating Information