2022-2023 TOYOTA TUNDRA - Tailgate Lettering Vinyl Wrap Overlay (TRD PRO ONLY)
Looking for a Subtle difference or an awesome accented color on your Tundra, this product is specifically designed for your rear tailgate. Available in gloss black, carbon fiber as well as our Pop Colors; Red, White, Yellow, and Acid Green. This product is manufactured with high quality, automotive grade vinyl wrap. Not sticker vinyl. This vinyl is vastly different from your typical decal/sticker vinyl. This material is easily conformable and because of its air release technology simple to place and re-position, as well as install when squeegeeing it into place. This is the same material we use to wrap entire vehicles! Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results. Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for a unique styling modification, or you just want to change up the factory look and help protect your door handles from scuffs and scratches, it's a great idea to checkout this vinyl overlay.
TOOLS REQUIRED: PRO FELT SQUEEGEE, HEAT GUN or Warm Sunny Day to Post Heat the product
DRY INSTALL -> NOT A WET INSTALLATION PRODUCT
PART 1 - DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.
PART 2: Once you have completed part one - dry install basics, you can move onto this step.
Alignment: Use the inner corners and edges of the letters to help you align the vinyl in place, once lined up everything else will fall into place.
Once you're happy with your placement, use a squeegee, starting in the center of the overlay moving towards the outer edges with firm pressure to push out any air from underneath the vinyl as you are applying it to the surface.
Go back over the entirety of the overlay with a squeegee to insure all air has been removed from underneath the vinyl, and then all that is left to do is peel the transfer tape off then use a heat gun to post heat the material, or leave the vinyl in the warm sun for a couple of hours to set completely.
• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.
• Car wash safe.
• Can be removed without any damage to surface.
• 2-5 year life expectancy.
• Check your local laws and regulations
DIFFICULTY RATING: 2/5
MORE >> Difficulty Rating Information