This overlay includes a Driver and Passenger Side Smoke Tint Overlay for the 2019 Subaru Ascent. It is coupled well with our Reverse Light V1 And V2 overlays (Products Sold Separately). Pre-Cut to fit the Clear insert in your taillight on the upper half where your turn signal is and it gives it a whole new look.
This Product is made with excess material for tucking around the inner side of the light closer to the hatch so that no clear is showing and you get the smoke look you really want. You simply trim whatever you have left over as soon as you have played and finalized the installation.
Made from quality smoked tint vinyl, that is dark in appearance but still allows more than optimal light output.
Application takes roughly 15 minutes to complete the entire project. Starting with a clean surface is a must. We recommend installing indoors on a cool day. If your car has been sitting outside in the heat, pull it into a garage or shaded area, away from air borne debris, where the surface can decrease in temperature until it's cool to the touch. We recommend wiping the surface clean with alcohol and a microfiber towel. You'll want to light spray the surface with water and then spray the adhesive side of your tint with water and maneuver the overlay into play. The water will allow you to pick the tint back up if you do not place it right the first time but make sure to respray the surface before trying to place the overlay again. Line up the outer corners of the overlay and the bottom edge with the part of the taillight the overlay will be covering. The excess material on the inner edge of the light is used to tuck around the side of the light. You will then want to use the squeegee and press the water and air out firmly to remove any water or air bubbles. Once you've completed that you will want to use heat to conform any edges you need in place. For easiest install we recommend having our full tool kit on hand - https://www.premiumautostyling.com/premium-tool-kit/ -For more details watch our attached install video. (Video Coming Soon)
Our Window Trim Chrome Delete Kit is made specifically for the 2019 Subaru Ascent.